You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Mobilaire compressor question another thing, not making anymore???
- Thread starter Rebjane
- Start date
M
Mayasmom
Guest
Mobilaire compressor question
I have another question about the Mobilaire compressor. The hose keeps popping off when we turn it on. I see a few posts about this problem but no solution. Does anyone have a suggestion on how to stop this from happening? We are using the hose that came with the Pari LC Plus nebulizer. Does anyone else use this particular nebulizer with this compressor? Do you set it at 35 psi for Pulmozyme? I don't think we need to set it higher because the Pari cup also contributes to break-down the particle size much better than the sidestream, I belive. Please correct me if I'm wrong. We bought this compressor only for Pulmozyme. My daughter thinks its too loud and prefers to use the Pari Ultra II for her hypertonic saline with the Pari neb cups. Any input is much appreciated!
I have another question about the Mobilaire compressor. The hose keeps popping off when we turn it on. I see a few posts about this problem but no solution. Does anyone have a suggestion on how to stop this from happening? We are using the hose that came with the Pari LC Plus nebulizer. Does anyone else use this particular nebulizer with this compressor? Do you set it at 35 psi for Pulmozyme? I don't think we need to set it higher because the Pari cup also contributes to break-down the particle size much better than the sidestream, I belive. Please correct me if I'm wrong. We bought this compressor only for Pulmozyme. My daughter thinks its too loud and prefers to use the Pari Ultra II for her hypertonic saline with the Pari neb cups. Any input is much appreciated!
M
Mayasmom
Guest
Mobilaire compressor question
I have another question about the Mobilaire compressor. The hose keeps popping off when we turn it on. I see a few posts about this problem but no solution. Does anyone have a suggestion on how to stop this from happening? We are using the hose that came with the Pari LC Plus nebulizer. Does anyone else use this particular nebulizer with this compressor? Do you set it at 35 psi for Pulmozyme? I don't think we need to set it higher because the Pari cup also contributes to break-down the particle size much better than the sidestream, I belive. Please correct me if I'm wrong. We bought this compressor only for Pulmozyme. My daughter thinks its too loud and prefers to use the Pari Ultra II for her hypertonic saline with the Pari neb cups. Any input is much appreciated!
I have another question about the Mobilaire compressor. The hose keeps popping off when we turn it on. I see a few posts about this problem but no solution. Does anyone have a suggestion on how to stop this from happening? We are using the hose that came with the Pari LC Plus nebulizer. Does anyone else use this particular nebulizer with this compressor? Do you set it at 35 psi for Pulmozyme? I don't think we need to set it higher because the Pari cup also contributes to break-down the particle size much better than the sidestream, I belive. Please correct me if I'm wrong. We bought this compressor only for Pulmozyme. My daughter thinks its too loud and prefers to use the Pari Ultra II for her hypertonic saline with the Pari neb cups. Any input is much appreciated!
M
Mayasmom
Guest
Mobilaire compressor question
I have another question about the Mobilaire compressor. The hose keeps popping off when we turn it on. I see a few posts about this problem but no solution. Does anyone have a suggestion on how to stop this from happening? We are using the hose that came with the Pari LC Plus nebulizer. Does anyone else use this particular nebulizer with this compressor? Do you set it at 35 psi for Pulmozyme? I don't think we need to set it higher because the Pari cup also contributes to break-down the particle size much better than the sidestream, I belive. Please correct me if I'm wrong. We bought this compressor only for Pulmozyme. My daughter thinks its too loud and prefers to use the Pari Ultra II for her hypertonic saline with the Pari neb cups. Any input is much appreciated!
<br />
I have another question about the Mobilaire compressor. The hose keeps popping off when we turn it on. I see a few posts about this problem but no solution. Does anyone have a suggestion on how to stop this from happening? We are using the hose that came with the Pari LC Plus nebulizer. Does anyone else use this particular nebulizer with this compressor? Do you set it at 35 psi for Pulmozyme? I don't think we need to set it higher because the Pari cup also contributes to break-down the particle size much better than the sidestream, I belive. Please correct me if I'm wrong. We bought this compressor only for Pulmozyme. My daughter thinks its too loud and prefers to use the Pari Ultra II for her hypertonic saline with the Pari neb cups. Any input is much appreciated!
<br />
Mobilaire compressor question
If you do wash your filter, make sure you only wash the black foam filter. The white filter is supposed to stay dry.
As far as the hose popping off. We only occasionally have a problem with that. Normally a new hose will fix it (but I have come across new hoses that don't seem to fit tight enough). Also, we run ours at 30 psi, so I'm not sure if we would encounter more problems at 35 psi.
If you do wash your filter, make sure you only wash the black foam filter. The white filter is supposed to stay dry.
As far as the hose popping off. We only occasionally have a problem with that. Normally a new hose will fix it (but I have come across new hoses that don't seem to fit tight enough). Also, we run ours at 30 psi, so I'm not sure if we would encounter more problems at 35 psi.
Mobilaire compressor question
If you do wash your filter, make sure you only wash the black foam filter. The white filter is supposed to stay dry.
As far as the hose popping off. We only occasionally have a problem with that. Normally a new hose will fix it (but I have come across new hoses that don't seem to fit tight enough). Also, we run ours at 30 psi, so I'm not sure if we would encounter more problems at 35 psi.
If you do wash your filter, make sure you only wash the black foam filter. The white filter is supposed to stay dry.
As far as the hose popping off. We only occasionally have a problem with that. Normally a new hose will fix it (but I have come across new hoses that don't seem to fit tight enough). Also, we run ours at 30 psi, so I'm not sure if we would encounter more problems at 35 psi.
Mobilaire compressor question
If you do wash your filter, make sure you only wash the black foam filter. The white filter is supposed to stay dry.
<br />
<br />As far as the hose popping off. We only occasionally have a problem with that. Normally a new hose will fix it (but I have come across new hoses that don't seem to fit tight enough). Also, we run ours at 30 psi, so I'm not sure if we would encounter more problems at 35 psi.
If you do wash your filter, make sure you only wash the black foam filter. The white filter is supposed to stay dry.
<br />
<br />As far as the hose popping off. We only occasionally have a problem with that. Normally a new hose will fix it (but I have come across new hoses that don't seem to fit tight enough). Also, we run ours at 30 psi, so I'm not sure if we would encounter more problems at 35 psi.
M
Mayasmom
Guest
Mobilaire compressor question
Teri, do you use the Pari cup or sidestream?
Teri, do you use the Pari cup or sidestream?
M
Mayasmom
Guest
Mobilaire compressor question
Teri, do you use the Pari cup or sidestream?
Teri, do you use the Pari cup or sidestream?
M
Mayasmom
Guest
Mobilaire compressor question
Teri, do you use the Pari cup or sidestream?
Teri, do you use the Pari cup or sidestream?
theLostMiler
New member
Mobilaire compressor question
I havent changed my felt filter yet, I just ordered one though, I periodically wash the foam one. I also took about the back of the machine and washed the grate and the fan blades off (though that air isnt inhaled, but it was an effort to try to keep the machine in tip top shape).
I only run mine at 25-30 psi and I typically only have a problem with the hose popping off when its time to change tubing. I normally use the winged tipped tubing that comes with the Pari LC SPRINT. Sometimes I use the blue and green ended kind where the blue end I think is the harder end...? I have the most problems I think with the green/green tubing. I hate when it pops off, scares me to death ahah
I havent changed my felt filter yet, I just ordered one though, I periodically wash the foam one. I also took about the back of the machine and washed the grate and the fan blades off (though that air isnt inhaled, but it was an effort to try to keep the machine in tip top shape).
I only run mine at 25-30 psi and I typically only have a problem with the hose popping off when its time to change tubing. I normally use the winged tipped tubing that comes with the Pari LC SPRINT. Sometimes I use the blue and green ended kind where the blue end I think is the harder end...? I have the most problems I think with the green/green tubing. I hate when it pops off, scares me to death ahah
theLostMiler
New member
Mobilaire compressor question
I havent changed my felt filter yet, I just ordered one though, I periodically wash the foam one. I also took about the back of the machine and washed the grate and the fan blades off (though that air isnt inhaled, but it was an effort to try to keep the machine in tip top shape).
I only run mine at 25-30 psi and I typically only have a problem with the hose popping off when its time to change tubing. I normally use the winged tipped tubing that comes with the Pari LC SPRINT. Sometimes I use the blue and green ended kind where the blue end I think is the harder end...? I have the most problems I think with the green/green tubing. I hate when it pops off, scares me to death ahah
I havent changed my felt filter yet, I just ordered one though, I periodically wash the foam one. I also took about the back of the machine and washed the grate and the fan blades off (though that air isnt inhaled, but it was an effort to try to keep the machine in tip top shape).
I only run mine at 25-30 psi and I typically only have a problem with the hose popping off when its time to change tubing. I normally use the winged tipped tubing that comes with the Pari LC SPRINT. Sometimes I use the blue and green ended kind where the blue end I think is the harder end...? I have the most problems I think with the green/green tubing. I hate when it pops off, scares me to death ahah
theLostMiler
New member
Mobilaire compressor question
I havent changed my felt filter yet, I just ordered one though, I periodically wash the foam one. I also took about the back of the machine and washed the grate and the fan blades off (though that air isnt inhaled, but it was an effort to try to keep the machine in tip top shape).
<br />
<br />I only run mine at 25-30 psi and I typically only have a problem with the hose popping off when its time to change tubing. I normally use the winged tipped tubing that comes with the Pari LC SPRINT. Sometimes I use the blue and green ended kind where the blue end I think is the harder end...? I have the most problems I think with the green/green tubing. I hate when it pops off, scares me to death ahah
I havent changed my felt filter yet, I just ordered one though, I periodically wash the foam one. I also took about the back of the machine and washed the grate and the fan blades off (though that air isnt inhaled, but it was an effort to try to keep the machine in tip top shape).
<br />
<br />I only run mine at 25-30 psi and I typically only have a problem with the hose popping off when its time to change tubing. I normally use the winged tipped tubing that comes with the Pari LC SPRINT. Sometimes I use the blue and green ended kind where the blue end I think is the harder end...? I have the most problems I think with the green/green tubing. I hate when it pops off, scares me to death ahah
theLostMiler
New member
Mobilaire compressor question
oh and the filter is located in the screw in thing in the "A" outlet which is labled on the top of the machine (the dark green area where there is like "A", "B" stuff)
oh and the filter is located in the screw in thing in the "A" outlet which is labled on the top of the machine (the dark green area where there is like "A", "B" stuff)
theLostMiler
New member
Mobilaire compressor question
oh and the filter is located in the screw in thing in the "A" outlet which is labled on the top of the machine (the dark green area where there is like "A", "B" stuff)
oh and the filter is located in the screw in thing in the "A" outlet which is labled on the top of the machine (the dark green area where there is like "A", "B" stuff)